Cypriot Homes Designs Cyprus
The house is built between two narrow streets in the old part of the town of Lemesos, about 50m from one of the most popular stretches of sandy beach in Cyprus, and just down the road from the house I grew up. The site was previously occupied by an old carob mill that burnt down in a fire in 1989, leaving only the ruins of the stone walls.
The aim was to create a family home for me, my wife, and our four boys. For convenience and privacy, we wanted our place of work to be within the same plot but to have a separate entrance. The building had to fit into it’s surrounding environment of both traditional two storey stone and adobe single family dwellings, and some small old industrial buildings. At the same time it had to be modern, learning from traditional architecture but not copying it. Towards my aim of creating a coherent and safe environment for my family, I drew ideas from my own childhood memories of playing under huge plane trees in a house next to a mountain stream.
Last but not least, I wanted to apply ecological solutions to heating, cooling, lighting and water management.
Most rooms in the house face the partly covered internal courtyard. This is a traditional way of building in Cyprus helping to keep the family together and safeguard the privacy of the occupants.
A neoclassical proportional system that relates to human scale, is applied to both interior and exterior surfaces and can be seen in plan, elevation and section.
Like music, Architecture needs to touch our senses. To do this, opposites need to be combined. In music is quick/slow, melodic/rock. In architecture, is open/enclosed, dark/brightly lid, hot/cold, hard-soft, heavy-light. Is these opposites that wake up our senses and give us a sense of belonging. The house is full of these opposites.
Walls are 55-75cm thick, made out of aerated concrete blocks, with thermal resistance well beyond that of the traditional adobe wall. In Lemesos, the energy requirement of a modern building for cooling alone is 70% of the total energy consumed. The house does not have a conventional cooling system. It is cooled by a combination of elements. Traditional ceiling fans. Shaded roof windows and a hallway rising up three storeys, draw hot air out using the stack effect principle. Large plane trees in the internal garden and correct building orientation, give shade. The water from the fish ponds and pool that cover the 65% of the internal garden area, evaporates providing additional cooling.
Credited to www.e-architect.co.uk
The house is built between two narrow streets in the old part of the town of Lemesos, about 50m from one of the most popular stretches of sandy beach in Cyprus, and just down the road from the house I grew up. The site was previously occupied by an old carob mill that burnt down in a fire in 1989, leaving only the ruins of the stone walls.
The aim was to create a family home for me, my wife, and our four boys. For convenience and privacy, we wanted our place of work to be within the same plot but to have a separate entrance. The building had to fit into it’s surrounding environment of both traditional two storey stone and adobe single family dwellings, and some small old industrial buildings. At the same time it had to be modern, learning from traditional architecture but not copying it. Towards my aim of creating a coherent and safe environment for my family, I drew ideas from my own childhood memories of playing under huge plane trees in a house next to a mountain stream.
Last but not least, I wanted to apply ecological solutions to heating, cooling, lighting and water management.
Most rooms in the house face the partly covered internal courtyard. This is a traditional way of building in Cyprus helping to keep the family together and safeguard the privacy of the occupants.
A neoclassical proportional system that relates to human scale, is applied to both interior and exterior surfaces and can be seen in plan, elevation and section.
Like music, Architecture needs to touch our senses. To do this, opposites need to be combined. In music is quick/slow, melodic/rock. In architecture, is open/enclosed, dark/brightly lid, hot/cold, hard-soft, heavy-light. Is these opposites that wake up our senses and give us a sense of belonging. The house is full of these opposites.
Walls are 55-75cm thick, made out of aerated concrete blocks, with thermal resistance well beyond that of the traditional adobe wall. In Lemesos, the energy requirement of a modern building for cooling alone is 70% of the total energy consumed. The house does not have a conventional cooling system. It is cooled by a combination of elements. Traditional ceiling fans. Shaded roof windows and a hallway rising up three storeys, draw hot air out using the stack effect principle. Large plane trees in the internal garden and correct building orientation, give shade. The water from the fish ponds and pool that cover the 65% of the internal garden area, evaporates providing additional cooling.
Credited to www.e-architect.co.uk
Take the sides of the froth and paste them together to make a cylinder. Do a tad at once to permit the paste to cool until you have a straight, secure crease. Hold the edges together during this procedure to completely stick each side of the froth to the next.
ReplyDeleteFursuits are creature ensembles fursuits for kids
that can be utilized in a wide dutch angel dragon fursuit
assortment of ways. Most regularly connected with the fuzzy network, dragon fursuit
fursuits are likewise usually Press the front and back of the top piece of the froth tube into the focal point of the cylinder and paste them together. At that point, crease in the correct side, and overlap in the left side. Remove overabundance froth and paste the parts you collapsed down together to shape an adjusted top.
Remove knocks and additional froth as much as possible, as this will just make the fursuit head look rough and lopsided on top.
lavafox fursuit
utilized for sports mascots and worthy missions. dinosaur fursuit After this, you ought to have a tall cylinder that slides cozily over you with a touch of froth stretching out over your head.
Be cautious around craft glue, and request that somebody help you in the event that you are stressed over harming yourself.
The head is the most convoluted piece of a fursuit, fursuit head
however it additionally depicts the most character. digitigrade fursuit
Making your own fursuit head takes quite a while, so put in a safe spot an entire evening for this undertaking!
Wrap 1 inch (2.5 cm) thick froth around your head to get a feeling of how wide the shape will be. pig fursuit
Expect to make it fit so you can slip it on and off without getting your ears or nose. Imprint where the froth meets in the rear of your head, female fursuit
at that point remove any abundance froth so the edges get together.
You will wind up with a bit of froth as tall as your head that will be folded into a cylinder.